Cheddite .410 2-1/2" new primed hull (bag/100)
These are true .410 hulls according to SAAMI specifications. The maximum body diameter, which is slightly wider than CIP European standards, They are stamped .410 on the head.
- 8mm brass
- Skived tube (taped material at the top of the hull)
- Cheddite 209 Primer
- Headstamp: "Cal. 36"
- Mfg by Cheddite
If cartridge manufacturers do not produce their own hulls, it is highly likely that they are using Cheddite hulls. These are reliable straight-wall hulls; extremely versatile for almost all load types. They crimp easily, either with a fold or roll. Primed with the reliable CX2000 (known as the Cheddite-209 in the USA).
A Super Crown Crimp Starter will make your crimping easier with much more satisfying results. Improved crimps and more complete powder ignition will result.
Remember, new/primed hulls are your best value and there's never a Hazmat charge when you ship them via ground service in the contiguous U.S.
Load data: See our Small Bore Manual both for lead & nontoxic loads, including buckshot loads for some .410 handguns.
Save even more....
Click here to buy in case quantity
|Comparison Chart: .410 2-1/2" and 3" hulls|
|*Select an alternative if your first choice is out of stock.|
Made in France
|Product Type: New and primed shotshell hulls|
Specs: Cheddite-209 primer (industry tolerances apply to all measurements)
SHIPPING: Ammunition or hulls shipped by ground service do not require a HazMat fee. Any ammunition shipped by air service does require an Air HazMat fee. Our sales associates can help you with any questions.
WARNING: You must be 18 years or older to purchase ammunition. Always make sure you use the correct ammunition for your specific firearm. Check local laws for other regulations. ATTENTION: Residents of DE, DC, IL, MA, NY, and OH please check your local laws for restrictions before ordering any ammunition products.