MEC Steel Shot Kit (#1308433)
for Single-Stage MEC reloaders
With this kit you can use any MEC single-stage reloader such as the 600 Junior and the Sizemaster for handloading steel shot.
Tip: This steel shot kit is also useful with large lead or other non-toxic shot. These pellets flow through the steel shot drop tube with less hang ups and binding. Includes shot feeding assembly.
NOTE: If you are crimping new, unfired hulls you may need the increased sharpness and crimp depth supplied by the brass-machined Super Crown Crimp Starter. (See information below.)
Click here to view MEC Bushing Chart
Curmudgeon's Loading Tips:
HOT-RODDING YOUR MEC RELOADER:
You can improve MEC performance with just a couple convenient accessories:
Better Crimps: When loading new/primed hulls, your crimps may not stay closed if you are using a standard plastic crimp starter. The Super Crown Crimp Starter is designed to put a lasting crimp memory into new plastic, essential for tight and functional crimps on new hulls. The Super Crown also provides better crimps on once-fired hulls too.
For more great load data and loading hints, click on the Curmudgeon and sign up for our weekly email updates and product specials.
- MEC accessory/part
- Made in USA
*Review Reply: The review below is partially correct in that this varies by the type and thickness of the wad you are using. Our lab recommends using a smaller diameter drop tube for thick wads OR you can do what the Curmudgeon does and simply push the column down with a wooden dowel.