PT1215 lead shot wad 12ga 1-1/8 oz.
Click here to see the data sheet and over 100 lab-tested load recipes for the PT1215
The PT wad series is hard on targets, but easy on your wallet. PT wads are better than ever; high quality product and low, low prices. Our ballistic lab loves this wad. Team BPI uses it for many high performance clay target loads.
- Honeycomb crush section reduces recoil and spike pressures
- Easy-loading and adjustable
- Highly consistent pressures and velocities
- Optimum pattern performance
- Knit petals eliminate nesting
- Virgin materials assure consistency
- Save money every time you pull the trigger
Use the chart below to determine the appropriate load data for each wad. You'll find great data for all these wads in our Advantages manual.
Curmudgeon's Loading Tips:
||12ga Wads for lead shot
||PT1205 12ga 250/bag
||3/4 to 1 oz
||PT1210 12ga 250/bag
||1 to 1-1/8 oz
||PT1232 12ga 250/bag
||1 to 1-1/4 oz
||PT1215 12ga 250/bag
||1 to 1-1/4 oz
||PT1220 12ga 250/bag
||1-1/8 to 1-1/4
TYPE: (taper = 1, straight = 1-1/8 to 1-1/4 oz.) 12 gauge lead target & small game. A versatile trap, skeet, sporting clays and game load wad for 1-ounce in taper-wall hulls (Win AA-HS & Rem STS) and 1-1/8 ounce in straight-wall hulls (Fiocchi & Federal).
This wad has become Curmudgeon's "sky-sweeper" sporting clays load. If the clay is ranging "out" there at a significant distance, this wad simply "sweeps" it away. Multi-folding cushion section (.660") plus shotcup depth of .790""and four "quick-opening" petals. Reloads best at 1-1/8 ounce lead in the straight-wall (Fiocchi, MultiHull, Federal) shotgun hull and 1-ounce with taper-wall hulls (Win WAA-HS & Remington STS) target hulls.
The propellants utilized in straight-wall hulls at 1-1/8 ounce loads are the typical fast burn-rate powders plus intermediate burn rate propellants. Current velocity charts range from 1180 FPS to 1325 FPS in 1-1/8 ounce loads.
|Product Type: Wad, Propulsion Technologies (PT)|
Loading Data: see Advantages
Made in Denmark