PT1253 Multi-Metal wad for 12ga (bulk case/5000)
PT wads are back and at the same great prices. These wads are all molded in Denmark. All-new 2016 production. Use the chart below to determine the appropriate load data for each wad. You'll find great data for all these wads in our Advantages and Status of Steel manuals.
||12ga Wads for non-toxic shot
||PT1251 12ga 250/bag
||3/4 oz. steel
||PT1253 12ga 250/bag
||7/8 oz. steel
||PT1260 12ga 250/bag
||1 oz. steel
||PT1265 12ga 250/bag
||1 oz. steel
||PT1270 12ga 250/bag
||1-1/4 oz. steel
Click here to buy in case quantity
Curmudgeon's Loading Tips
TYPE: 1-1/4 (lead) or 7/8 (steel) The 12ga PT1253 posesses Multi-Metal™ capabilities with a multi-folding cushion section, large accommodating shotcup with four 45-degree slits set in thick (.045") high-density plastic. The PT1253 accommodates steel, lead, ITX shot and just about anything that may come along. The PT1253 has three sections: A gas seal, a multi-section crush section and the angle-slit shotcup.
SPECS: Overall length is 1.780", shotcup depth is 1.110", wall thickness is .045" with four pre-cut 45-degree angled slits. The articulated cushion column (.450" length) offers adjustable heights permitting the use of many propellants in varied densities. The PT1253 is capable of being loaded in a number of straight-wall hulls and zips through progressive reloading tools or single-stage reloading tools. A 7/8-ounce load of #7 steel shot at about 1300 FPS seems to be ideal for non-toxic clay targets. This load of shot fits ideally into the PT1253 shotcup.
NOTE: The reduced internal volume of tapered target hulls (Win AA-HS and Rem STS) do not function with the PT1253 wad.
|Product Type: Wad, Multi-Metal capable for field use.|
Load data: See Advantages, ITX manuals.
Typical Loads: Non-toxic and high-capacity field loads.
Made in Denmark