Cheddite 16ga 2-3/4" new primed hull 10mm (2500 case)
- Top Edge: Skived
- Depth: 2.454"
- Length: 2.724"
- Brass: 10mm
- Primer: Cheddite-209 (CX2000)
- Headstamp: "16" and stars
- Wall Thickness: 0.027"
If cartridge manufacturers do not produce their own hulls, then it is a good chance that they may be using Cheddite hulls. These are reliable straight-wall hulls. They are extremely versatile for almost all load types. They crimp easily, either with a fold or roll. Primed with the reliable CX2000 (known as the Cheddite-209 in the USA).
Crimping new hulls: Our Super Crown Crimp Starter will make your crimping easier with much more satisfying results. Improved crimps and more complete powder ignition will result.
Shipping primed hulls: Remember, new/primed hulls are your best value and there's never a Hazmat charge when you ship them via ground service in the contiguous U.S.
Load data: See data in these manuals: Sixteen Gauge Manual, Advantages Manual
Both lead & non-toxic loads can be found in these volumes.
|Comparison Chart: 16ga 2-3/4" hulls|
|*Select an alternative if your first choice is out of stock.|