Cheddite 20ga 3 inch, 16mm brass, primed and skived (bag/100)

Cheddite 20ga 3 inch, 16mm brass, primed and skived (bag/100)
Item Number: 1392076
 Review Average:  
 Number of Reviews: 4
 View ReviewsReview this item
In Stock

Will be shipped via: STANDARD GROUND

 WARNING: This product can expose you to chemicals including lead, which are known to State of California to cause cancer and birth defects or other reproductive harm. For more information go to

Detailed Description

Cheddite 20ga 3" new/primed 16mm brass (100/bag)
Color: Yellow
Top Edge: Skived
Brass: 0.625" (16mm)
Primer: Cheddite-209
Headstamp: "20 (stars)" generic
Wall Thickness: 0.030"

Cheddite produces high quality hulls of all gauges and lengths for manufacturing clients all over the world. They produce well over a billion hulls every year. These are reliable straight-wall hulls; extremely versatile for almost all load types. They are skived and crimp easily with a fold or roll.
Crimping:  We prefer using a Super Crown Crimp Starter on new tubes because they generally need a little extra crimp memory. Roll crimps also work very well on these hulls. 

Shipping: Hulls are not regulated under 49CFR Special Provision 50. This means there is NO Hazmat charge when shipped by U.S. ground service. Contains a Cheddite 209 primer (Cheddite CX2000).

Comparison Chart: 20ga 3" hulls
Part # Mfg. Gauge Length Specs Primer Depth
#0622030 Federal 20ga 2.970 yellow/skived Fed 209A 2.738
#1392076 Cheddite 20ga 2.970 yellow/skived Ched-209 2.703
#0642030 Fiocchi 20ga 2.971 yellow/skived Fiocchi 616 2.673


Made in France

 Product ReviewsClick here to review this item
Great 20ga Hull for 3in loads 8/15/2023
These are great hulls, my go to for heavier 3in loads in the 1oz to 1 1/8oz steel / bismuth realm. For new hulls, they crimp pretty well in a MEC using the loader as is with no aftermarket parts. I get about 5 to 6 reloads out of each one with hunting and buck shot loads before tossing. I dont bother cutting 20 ga down to 2 3/4, though you could for more hull life. Best thing, Cheddites are regularly in stock and available compared to other brands - and constant in size and dimensions, unlike some other made for a particular load brands.
- Paul Rodriguez, CA
Good hull good price!! 10/14/2020
Been using these for a while now, good results only reason for 4 stars instead of 5 is the euro size primers as I am in the US and have a stock of CCI 209s and had to get some Euro sized ones ended up with Fiochi as they are a couple Thousandths bigger.... great hull for the money!!
Cheddite 20ga 8mm brass. 10/11/2014
Have been reloading Cheddite 20ga 8mm brass with Vectan A1 powder, 19mm fibre wads and 1oz. lead shot UK No.7. These are fine in my Browning Citori. However, 16mm brass is tricky. The ejectors do not like the longer brass and on two occasions the gun would not open. Had to dismantle the lock to get the shells out! Sprayed the brass with a silicone spray to be able to use up the shells.
- Simon Newington-Bridges, INT
Cheddite Multi-Hull 20ga 3 2/8/2013
I am reloading these hulls with 20 gn 800x powder and 1-1/4 oz nickel plated #6 lead for upland bird hunting. The results have been excellent for about .50 cents a round using a MEC 650 loader. Hulls should last for 5 to 10 reloads...
- Frank Cambra, CA

You May Also Like