Felt Wad 12ga 1/4 (250/bag)

Item Number: 1221412
 Review Average:  
 Number of Reviews: 1
 View ReviewsReview this item
In Stock

Detailed Description

Felt Cushion Wad - 12ga 1/4" (250/bag)

Unsurpassed energy absorption and cushioning qualities make our Felt material ideally suited as a cushion/filler wad. Felt wads have been the first choice for shotshell loaders for several generations and nothing has changed. We have used and recommended felt wads for hunting loads because they can accommodate many different loads and large shot sizes.

Adjusting Shot Columns: Different shot sizes will vary the shot column height of any given load (e.g., #9 shot will occupy less volume than #1 shot due to the space between the pellets). To remedy these height adjustments, use Cork or Felt wads underneath the shot to bring the shot column up to perfect crimping height. Cork wads are light, dense, very flexible, and very easy to work with.

Mix & Match: Felt wad sizes can be mixed and stacked to accommodate any shot column height requirements. When used as fillers inside shotcups, use 12 gauge felt wads inside 10 gauge shotcups and 20 gauge cork wads inside 12 & 16 gauge shotcups. Felt wads can be used in place of other filler wads, or on top of gas seals, but are not to be used directly on the powder.

Materials and Quality Assured: We use a special high-density synthetic felt to produce our felt wads. The material is tough and dense, so it won't smash down into a pulp when you crimp down. The high density material assures that pellets won't embed in either the felt wad or your shotcup base. Die cut from the highest quality virgin materials right here in Minnesota.

Part# Gauge Standard Felt Sizes Thick Qty.
#1221412 12 ga High-Density Synthetic Felt Wad 1/4" 250
#1221420 20 ga High-Density Synthetic Felt Wad 1/4" 250
#1221812 12 ga High-Density Synthetic Felt Wad 1/8" 250
#1221820 20 ga High-Density Synthetic Felt Wad 1/8" 250

Product Type: Filler and Cushion wad.
Sizes: See sizing chart for availability.
Material: Due cut from high-density synthetic felt.

Made in U.S.A.

 Product ReviewsClick here to review this item
bismuth 3/31/2011
best fiber wad I have found in all of my muzzle loading 12ga shotguns for bismuth and niceshot. holds the lube well,keeps gun very clean and doesnt blow patterns. also works really well between the nitro card and a plastic shotcup when shooting steel shot.
rich norton

You May Also Like