BP1680 16ga 7/8oz Multi-Metal Wad (6,000/case)

BP1680 Striker 16 Gauge Multi-Metal WadS (6,000/case)

The BP1680 Striker is manufactured with our toughest TPS molding resin. It is the toughest and sturdiest 16ga wad on the planet.  It is designed with Multi-Metal capabilities to accommodate heavy payloads in 16 gauge field loads. Our ballistic lab is producing all-new load data for the BP1680 that will include lead, steel, bismuth, BPX-12, SpheroTungsten 15.0, and SpheroTungsten 18.0. (Load data for the original PT1680 wad do not apply to the BP1680 Striker). Madein USA.

Specifications:

• Gauge: 16
• Overall Length: 1.625 inches
• Shotcup Depth: 1.413 inches
• Gas Seal Diameter: 0.670 inches
• Gas Seal Depth: 0.085 inches
• Wall thickness: .061 inches (max)
• Cushion Height: NA
• Weight: 37.0 grains
• Slits: Unslit
• Shot Type: Bismuth, Lead, Steel, Tungsten
• Quantity: 6,000 wads

Maximum Cup Capacities:

• Lead: 1-3/8 ounces
• Steel: 7/8 ounces

Load Data:  View loading data here

Load Data Note: The BP1680 Striker is NOT the same wad as the PT1680. Therefore, all new loading data is being produced for the BP1680 Striker. It is molded out of virgin material made right here in the USA. Different materials mean different load results. Do NOT use load data that was originally tested for the PT1680.

Slitting: The BP1680 Striker is an unslit shotcup. The handloader MUST slit this wad before loading. Three to four slits of a minimum depth of 80% of the total length of the wad are required. Failure to slit the wad will produce a potentially dangerous slug-type projectile. (A preslit version is coming soon.)

Features:

• Maximum-capacity 16ga field wad.
• Varied load payloads and shot types.
• Unslit for custom slitting.