Cheddite 16ga 2-3/4" new primed hull 8mm (bag/100)
Current Stock Color: Red or Green
- Top Edge: Skived
- Depth: 2.454"
- Length: 2.724"
- Brass: 8mm
- Primer: Cheddite-209 (CX2000)
- Headstamp: "16" and stars
- Wall Thickness: 0.027"
- Made in France
If cartridge manufacturers do not produce their own hulls, then it is a good chance that they may be using Cheddite hulls. These are reliable straight-wall hulls. They are extremely versatile for almost all load types. They crimp easily, either with a fold or roll. Primed with the reliable CX2000 (known as the Cheddite-209 in the USA).
Crimping new hulls: Our Super Crown Crimp Starter will make your crimping easier with much more satisfying results. Improved crimps and more complete powder ignition will result.
Shipping primed hulls: Remember, new/primed hulls are your best value and there's never a Hazmat charge when you ship them via ground service in the contiguous U.S.
Load data: See data in these manuals: Sixteen Gauge Manual, Advantages Manual Cheddite's 209 primer is comparable with Nobel Sport 209, Winchester 209, and CCI 209 primers. Any of the above mentioned primers may be used where the MH209 primer designation is shown in printed load data.
Both lead & non-toxic loads can be found in these volumes.
Sold per bag of 100.
|Comparison Chart: 16ga 2-3/4" hulls|
|*Select an alternative if your first choice is out of stock.|