Cheddite 12ga 2-3/4 8mm brass, primed and skived (100/bag)


Cheddite 12ga 2-3/4 8mm brass, primed and skived (100/bag)
Item Number: 1391272
 Review Average:  
 Number of Reviews: 2
 View ReviewsReview this item

Will be shipped via: STANDARD GROUND
Size/Color
 WARNING: This product can expose you to chemicals including lead, which are known to State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov

Detailed Description

Cheddite 12ga 2-3/4" new/primed 8mm brass hulls (100/bag)
 
  • Top Edge: Skived
  • Brass: 0.271" (8mm)
  • Primer: Cheddite-209
  • Headstamp: "12 (stars)" generic
  • Wall Thickness: 0.030"
  • Tube color: Clear, Black, or Red

Cheddite produces high quality hulls of all gauges and lengths for manufacturing clients all over the world. They produce well over a billion hulls every year. These are reliable straight-wall hulls; extremely versatile for almost all load types. They are skived and crimp easily with a fold or roll.

Crimping: We prefer using a Super Crown Crimp Starter on new tubes because they generally need a little extra crimp memory. Roll crimps also work very well on these hulls.

Shipping: Hulls are not regulated under 49CFR Special Provision 50. This means there is NO Hazmat charge when shipped by U.S. ground service. Contains a Cheddite 209 primer (Cheddite CX2000).

Made in France



 Product ReviewsClick here to review this item
Awesome Hulls! 5/29/2023
I shoot 1oz loads for trap. They work awesome with Clays and some Spitfire wads. I did an experiment with these. I loaded a batch and shot them. I did that and on the 9th loading, I decided to dump them. Everything was looking good but the crimps. At the 7th, 8th and 9th loading, the crimps started to mess up if you didnt watch them. Other than that, they loaded as many times as my Winchester AA hulls. These hulls crimp Easily and hold a crimp nicely. I used Cheddite primes and they all seem to be tight after the last of the loadings. All in all, Im very impressed. Ill be buying some more while they are in stock to stock up for any future dry spell that may happen.
- Eric, NY
 
Unique appearance! 6/19/2018
I bought 100 of these hulls to try roll crimping and immediately liked the appearance of using these clear hulls with nickel plated shot. It is so nice to actually see the components through the hull and the nickel plated shot makes for a super nice look. You can see what shot you have and while loading you also see the components as you assemble making sure that everything is going together properly. I have fold crimped these and they work fine but my favorite method is rolling with a clear overshot card.
- Joe L, PA
 

You May Also Like