Felt Wad .422 x 1/4 (250/bag)

Adjusting Shot Columns: Different shot sizes will vary the shot column height of any given load.  For example, #9 shot will occupy less volume than #1 shot due to the space between the pellets. To remedy these height adjustments, use Cork or Felt wads underneath the shot to bring the shot column up to the ideal crimping height. Cork and Felt wads are light, dense, very flexible, and very easy to work with.

Mix & Match: Felt wad sizes can be mixed and stacked to accommodate any shot column height requirements. When used as fillers inside shotcups, use .422” diameter felt wads inside 28 gauge shotcups and .281” diameter felt wads inside .410 bore shotcups. Felt wads can be used in place of other filller wads, or on top of gas seals, but are not to be used directly on the powder.

Materials and Quality Assured: We use a special high-density synthetic felt to produce our felt wads. Our material is tough and dense, so it won't smash down into a pulp when you crimp down. Our high-density material assures that pellets won't embed in either the felt wad or your shotcup base. Die cut from the highest quality virgin materials right here in Minnesota.