MG410 .410 Bore Wad (10,000/case)

MG410 Wad for .410 (10,000/case)

The MG410 is a relatively short-length wad, but it is built for a variety of payloads. This makes the MG410 an ideal wad for both light loads in 2-1/2" .410 and heavier loads in 3" .410.
The reloader may find that not all the shot for the load will fit into the shotcup. This is by design. The MG410 has a shorter cup than some .410 wads. The MG410 allows a percentage of the shot load to be held within the cup. A portion of the shot is not protected by the cup in order to create fringe-ring pattern development. Now available in bulk quantities!

Preferred Applications:
     • Optimum range: 20-45 yards
     • Heavy 3" loads
     • Light 2-1/2" loads

Specifications:
     • Gauge: .410
     • Shot Type: This wad is for lead shot and bismuth shot only (it will not protect bores when used with steel or tungsten shot)
     • Wad Dimensions: 1.070" overall length X .400" diameter
     • Seal To Cup Bottom: .335 Inches
     • Shotcup Depth: 0.730 Inches
     • Wad Slits: 2
     • Typical Loads: 3/8 oz to 5/8 oz in 2-1/2" hulls; 5/8 oz to 11/16 oz in 3" hull
     • Load Data: See the Small Bore Manual for load data

Made in Italy