PT2090 non-toxic shot 20ga unslit wad (250/bag)
PT wads offer great performance and an unbeatable price. We call this bang for the buck.
Use the chart below to determine the appropriate load data for each wad. You'll find great data for all these wads in our Advantages and Status of Steel manuals.
The PT2090 is a sturdy, thick-walled wad. It is purpose-built for tough steel and tungsten-based pellets. Our ballistic lab recommends this wad for steel shot loads, ITX and our SpheroTungsten shot in 15 and 18 density.
Capacity: The PT2090 holds 600 grains (about 1.4 ounces) of SpheroTungston shot.
Slitting: The PT2090 is produced only in an unslit version. The reloader must preslit these wads prior to loading. Failure to do so will produce a slug-type load that will not release the shot.
||20ga Wads for non-toxic shot
||PT2090 20ga 250/bag (unslit)
||3/4 oz. steel
||PT2091 20ga 250/bag
||3/4 oz. steel
||PT2092 20ga 250/bag
||1 oz. steel
Click here to buy in case quantity
Curmudgeon's Reloading Tips:
TYPE: 1-1/8 (lead), 3/4 (steel), 600 grains (SpheroTungsten). The PT2090 "The Tank" 20ga lead, ITX™, or steel column wad (static wad, no cushion) is designed for maximum bore protection and field loads in 2-3/4" and 3" 20ga rounds. Its best application is 1-1/8-ounce lead game loads, 1-ounce ITX™ game loads, and 3/4 ounce steel shot loads.
We call this wad "The Tank" because of its solid design and defensive nature. This is a stout little beast for your field loads. Customize it with your own slitting patterns. 1.620" in overall length with shotcup depth of 1.374" and NO slits. Slitting must be performed by the reloader prior to loading.
The PT2090 has tapered interior walls with thickness running near the mouth at .038" to a base side thickness of .060". The gas seal is .620" diameter & .140" deep.
Made in Denmark
|Product Type: Wad, Multi-Metal capable for field use.|
Load data: See Advantages, ITX, Small Bore manuals.
Typical Loads: Non-toxic and high-capacity field loads.