TPS 20ga 3 unslit wad (250/bag)

TPS 20ga 3 unslit wad (250/bag)
Item Number: 0722051
 Review Average:  
 Number of Reviews: 1
 View ReviewsReview this item
In Stock

Detailed Description

TPS 20ga 3" non-toxic shot wad unslit (250/bag)

TPS technology has finally arrived for your 20ga 3". The TPS 20ga 3" is a full-length shot column designed specifically for the rigors of modern non-toxic shot, such as steel, ITX, and SpheroTungsten shot. The TPS 20ga 3" allows for loads of almost any type of non-toxic shot for your modern 20ga 3" shotgun.

Designed with bore-contact-reducing technology, similar to our BP12 wad. This feature reduces wad contact with the bore and increases lateral wall strength.

Maximum shot capacities of #7 shot sizes:

  • Steel =  445 gr. (1 oz.)
  • SpheroTungsten Original-15 = 872 gr. (2 oz.)
  • SpheroTungsten Super Max-18 = 1070 gr. (2.4 oz.)
  • Lead = 635 gr. (1.5 oz.)

Capacity will vary according to pellet size and these maximum weights will not necessarily yield the best or even feasible loads; only testing results will render that decision. Our lab is working on more data at this time.

View sample LOAD DATA from our BP manuals

Buy by the case



  • Length = 1.983"
  • Depth = 1.739"
  • Gas seal diam. = 0.618"
  • Gas seal depth = 0.136"
  • Wall thickness at top = 0.040" 
  • Unslit (must be slit prior to loading)

 Product ReviewsClick here to review this item
Great for my Shotgun 2/25/2021
All shotguns, loads, variables, etc. are different from shooter to shooter. So your experience will vary. I will say these wads produce a perfect pattern in my 3in steel loads. I call my load with this wad the HAMMER. I went to all 20 gauge a few weeks into the season with an over and under and a pump using 3 inch hulls with this wad. That decision was 99% based on performance of the wad and pattern, 1% based on 20 gauge as my favorite. Well worth working up loads with this wad.
Paul Rodriguez