/ / / /

Cheddite 16ga 2-3/4 10mm brass, primed and skived, green (bag/100)

Item Number: 1391610

Review Average:

Number of Reviews: 3

View Reviews | Review this item

Unit Price: $12.99

Out of Stock

Will be shipped via: STANDARD GROUND

Share |

WARNING: This product can expose you to chemicals including lead, which are known to State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov

Detailed Description

Cheddite 16ga 2-3/4" new primed hull 10mm (bag/100)

Top Edge: Skived
Depth: 2.454"
Length: 2.724"
Brass: 10mm
Primer: Cheddite-209 (CX2000)
Headstamp: "16" and stars
Wall Thickness: 0.027"
Made in France

If cartridge manufacturers do not produce their own hulls, then it is a good chance that they may be using Cheddite hulls. These are reliable straight-wall hulls. They are extremely versatile for almost all load types. They crimp easily, either with a fold or roll. Primed with the reliable CX2000 (known as the Cheddite-209 in the USA).

Crimping new hulls: Our Super Crown Crimp Starter will make your crimping easier with much more satisfying results. Improved crimps and more complete powder ignition will result.

Shipping primed hulls: Remember, new/primed hulls are your best value and there's never a Hazmat charge when you ship them via ground service in the contiguous U.S.

Load data: See data in these manuals: Sixteen Gauge Manual, Advantages Manual
Both lead & non-toxic loads can be found in these volumes.

Click here to buy in case quantity

Comparison Chart: 16ga 2-3/4" hulls
Part #	Mfg.	Gauge	Length	Specs	Primer	Depth
#RIO167016	Rio	16ga	2.743	red/unskived 16mm	Rio 209	2.481
#1391670	Cheddite	16ga	2.724	blue/skived 16mm	Ched-209	2.454
#1391671	Cheddite	16ga	2.724	red/skived 8mm	Ched-209	2.454
#0641667	Fiocchi	16ga	2.725	blue/skived 16mm	Fiocchi 616	2.417
#064166708	Fiocchi	16ga	2.725	red/skived 8mm	Fiocchi 616	2.417
*Select an alternative if your first choice is out of stock.

Product ReviewsClick here to review this item

	Excellent hull	12/14/2017
Ive been reloading for 50+ years and only started using Cheddites in the past few years mainly because of the abundance of once fired Rem and Win hulls in the 12, 20 and 410 gauges. However when it comes to some odd gauges like 16 the hulls are hard to come by. I now use exclusively Cheddites for my 16 gauge target and field loads and find them an excellent hull to load new as well as reloading. Im amazed at how they look even after a few reloads. They are relatively inexpensive and with the right load pattern perfectly. One extra feature is Cheddite supplies hulls to many other manufacturers so you may have been using their hulls for years without knowing it.
- Joe Leighty, PA

	Great All Around 16 Gauge Hull	8/28/2017
Ive used these hulls to reload 16 gauge target and hunting loads. They crimp nicely and coming already primed gives this hull a great value. Ive loaded #8s for trap and #6 and #5 for pheasant hunting. At times 16 gauge shells are hard to come by so I always have a few boxes of reloads ready for the trap range and pheasant fields.
Cuddy Cudlip

	Great hulls, great price	10/10/2014
Ive reloaded several different brands of hulls, new and used, over about 10-12 years now. I tried Cheddite last, because I really wasnt familiar with the name. But I saw a recipe for a load that I wanted to try that included Cheddite, so I bought a bag of these primed and skived hulls. Well, the bottom line is that theyre great, as good as any Ive ever used and better than most. They crimp well, even when brand new--though admittedly I do use BPIs brass crimp starter tool--and they can be reloaded quite a few times. It turns out that the load I wanted to try has become my favorite load for upland birds. Try these hulls, even if youve never heard of them, because you wont regret it.
- Tom A, MD

Cheddite 16ga 2-3/4 10mm brass, primed and skived, green (bag/100)

You may also like: