Cheddite 16ga 2-3/4 16mm brass, primed and skived (bag/100)

Cheddite 16ga 2-3/4 16mm brass, primed and skived (bag/100)
Item Number: 1391670
 Review Average:  
 Number of Reviews: 3
 View ReviewsReview this item

Will be shipped via: STANDARD GROUND

 WARNING: This product can expose you to chemicals including lead, which are known to State of California to cause cancer and birth defects or other reproductive harm. For more information go to

Detailed Description

Cheddite 16ga 2-3/4" new primed hull 16mm (bag/100) 

  • Top Edge: Skived
  • Depth: 2.454"
  • Length: 2.724"
  • Brass: 16mm
  • Primer: Cheddite-209 (CX2000)
  • Headstamp: "16" and stars
  • Wall Thickness: 0.027"

Made in France

If cartridge manufacturers do not produce their own hulls, then it is a good chance that they may be using Cheddite hulls. These are reliable straight-wall hulls. They are extremely versatile for almost all load types. They crimp easily, either with a fold or roll. Primed with the reliable CX2000 (known as the Cheddite-209 in the USA).

Crimping new hulls: Our Super Crown Crimp Starter will make your crimping easier with much more satisfying results. Improved crimps and more complete powder ignition will result.

Shipping primed hulls: Remember, new/primed hulls are your best value and there's never a Hazmat charge when you ship them via ground service in the contiguous U.S.

Load data: See data in these manuals: Sixteen Gauge Manual, Advantages Manual
Both lead & non-toxic loads can be found in these volumes.

Sold per bag of 100.

Comparison Chart: 16ga 2-3/4" hulls
Part # Mfg. Gauge Length Specs Primer Depth
#RIO167016 Rio 16ga 2.743 red/unskived 16mm Rio 209 2.481
#1391670 Cheddite 16ga 2.724 blue/skived 16mm Ched-209 2.454
#1391671 Cheddite 16ga 2.724 red/skived 8mm Ched-209 2.454
#0641667 Fiocchi 16ga 2.725 blue/skived 16mm Fiocchi 616 2.417
#064166708 Fiocchi 16ga 2.725 red/skived 8mm Fiocchi 616 2.417
*Select an alternative if your first choice is out of stock.

 Product ReviewsClick here to review this item
Great hull for loading TSS for turkey loads!!! 11/16/2018
I use these hulls to load #9 TSS shot for my Remington 870 Express, and Savage 220A 16ga guns! They make a perfect roll crimp if I do my part! Great hull!
- 2Shooter, GA
Look and perform like factory loads..or better 11/2/2018
I have loaded 200 of these using the star crown crimp starter on my MEC 600 Jr. and they look as good as factory loads and shoot great.
- Jon, TX
Nice Crimp 12/14/2015
Ive only loaded a dozen or so so far of these but compared to the once fired Federal purple and Remington black hulls- these have crimped perfect every time! saves a little time too in that they are primed and NO hazmat fee to ship!
- Brett Shelagowski, MT

You May Also Like