|
Cheddite 16ga 2-3/4" new primed hull 10mm (2500 case)
- Top Edge: Skived
- Depth: 2.454"
- Length: 2.724"
- Brass: 10mm
- Primer: Cheddite-209 (CX2000)
- Headstamp: "16" and stars
- Wall Thickness: 0.027"
- Made in France
If cartridge manufacturers do not produce their own hulls, then it is a good chance that they may be using Cheddite hulls. These are reliable straight-wall hulls. They are extremely versatile for almost all load types. They crimp easily, either with a fold or roll. Primed with the reliable CX2000 (known as the Cheddite-209 in the USA).
Crimping new hulls: Our Super Crown Crimp Starter will make your crimping easier with much more satisfying results. Improved crimps and more complete powder ignition will result.
Shipping primed hulls: Remember, new/primed hulls are your best value and there's never a Hazmat charge when you ship them via ground service in the contiguous U.S.
Load data: See data in these manuals: Sixteen Gauge Manual, Advantages Manual
Both lead & non-toxic loads can be found in these volumes.
| Comparison Chart: 16ga 2-3/4" hulls |
| Part # |
Mfg. |
Gauge |
Length |
Specs |
Primer |
Depth |
| #RIO167016 |
Rio |
16ga |
2.743 |
red/unskived 16mm |
Rio 209 |
2.481 |
| #1391670 |
Cheddite |
16ga |
2.724 |
blue/skived 16mm |
Ched-209 |
2.454 |
| #1391671 |
Cheddite |
16ga |
2.724 |
red/skived 8mm |
Ched-209 |
2.454 |
| #0641667 |
Fiocchi |
16ga |
2.725 |
blue/skived 16mm |
Fiocchi 616 |
2.417 |
| #064166708 |
Fiocchi |
16ga |
2.725 |
red/skived 8mm |
Fiocchi 616 |
2.417 |
| *Select an alternative if your first choice is out of stock. | | 
