Cheddite .410 2.5" 16mm Primed Hull (5,500/case)

Cheddite .410 2-1/2" 16mm new primed hull (5500/case) 

These are true .410 hulls according to SAAMI specifications. The maximum body diameter, which is slightly wider than CIP European standards, They are stamped .410 on the head.

Specifications:
     + Gauge: .410 Bore
     + Length: 2.5"
     + Primer: Cheddite CX50
     + Color: Red, Clear
     + Brass Height: 16mm
     + Top Edge: Skived tube (taped material at the top of the hull)
     + Headstamp: "410"

If cartridge manufacturers do not produce their own hulls, it is highly likely that they are using Cheddite hulls. These are reliable straight-wall hulls; extremely versatile for almost all load types. They crimp easily, either with a fold or roll. Primed with the reliable CX50 (known as the Cheddite-209 in the USA).

A Super Crown Crimp Starter will make your crimping easier with much more satisfying results. Improved crimps and more complete powder ignition will result.

Remember, new/primed hulls are your best value and there's never a Hazmat charge when you ship them via ground service in the contiguous U.S.

Load data: See our Small Bore Manual both for lead & nontoxic loads, including buckshot loads for some .410 handguns.