Fiocchi .410 3 new/primed hull (100/bag)

Fiocchi .410 3 new/primed hull (100/bag)
Item Number: 0644130
 Review Average:  
 Number of Reviews: 6
 View ReviewsReview this item
Out of Stock

Will be shipped via: STANDARD GROUND
 WARNING: This product can expose you to chemicals including lead, which are known to State of California to cause cancer and birth defects or other reproductive harm. For more information go to

Detailed Description

Fiocchi .410 bore 3" new/primed hulls (100/bag)

*5 bag limit per customer per month.  Limited quantity available


  • Overall length 2.982"
  • Brass height 0.641"
  • Brass diam. 0.467"
  • Wall thickness 0.033"
  • Body diam. 0.455"
  • Depth 2.685"
  • Skived
  • Fiocchi 616 primer


The internal height has not changed, but the shape of the basewad is curved to create better propulsion with slow-burn rate powders. A new waist helps to lock the basewad in place and provide a better gas seal. The basewad material is tough plastic resin.e different colors such as white, blue, or black.  

Fiocchi hulls offer high capacity and easy crimping; a terrific all-purpose hull for clay and field loads. Primed and ready to load, these hulls will meet all your loading needs. Fiocchi hulls are an excellent choice for almost any style of load.

Remember, new/primed hulls are your best value and there's never a Hazmat charge when you ship them via ground service in the contiguous U.S.

Load data: See our Small Bore Manual both for lead & nontoxic loads, including buckshot loads for some .410 handguns.

SHIPPING: Ammunition or hulls shipped by ground service do not require a HazMat fee. Any ammunition shipped by air service does require an Air HazMat fee. Our sales associates can help you with any questions.

ATTENTION:  Residents of CA, CT, DE, DC, IL, KS, MA, NY, OH and WA, check your local laws before ordering ammunition products.  By placing an order, you certify you are of legal age and satisfy all federal, state and local legal/regulatory requirements prior to purchase.

 Product ReviewsClick here to review this item
2 percent hulls separate from brass 4/3/2024
These work great in an o/u or sxs but not so much in a repeater. About 2% of hulls separate from brass in my 1100 and Browning 42 . 5/8 oz #5 within BP stretch and and overshot wad otherwise produce a great pheasant load out to about 35 yds.
- Bubba, VT
May get one reload from these 1/4/2024
I have been reloading since 1988 These hulls do not hold a crimp and I have found they are good for one load I have spoken to their techs they were helpful but still have the same problems I was told just to cut them once they were fired and make 2 1/2 loads
If you've been loading as long as you say, then you should know that there it is not the hulls fault that you can't get a crimp. You need better tools that are suited to crimping new hulls. Since they do not have a pre-formed crimp memory, you need a SUPER CROWN CRIMP STARTER, a ROLL CRIMPER, or a GAEP or OMV system. Anybody that utilizes these tools will never use anything else. All .410 loads use slow-burn powders. These powders are incompatible with long hull life. Nobody can change that law of physics.
--BP Lab
Fiocchi 3 410 hulls 11/20/2022
Longest life 410 hull I have used. Have reloaded several of these over nine times and crimp looks like second time. Even with Lilgun steel loads.
- Steve, WA
.410 Hulls needed 9/19/2022
Cmon! Get this product back in stock!!!!
- D Dietert, TX
Lord knows that we are trying. All of the supply chain issues that are haunting the industry are beyond our control. We'll keep you updated on our weekly emails.
--BP Labs
410 hulls 5/17/2022
410 empty hu
- Bob Jackson, AL
Fiocchi 410 hulls. 3 10/19/2020
I have ordered over 3,000 of these hulls... they work perfectly for reloading. they crimp nicely and they de-prime and resize very well...I have used these in my Spolar Gold reloader and in my Mec 600 JR.
- Jim Kostelic, OH

You May Also Like