Felt Wad .500" (28ga diam) x 1/4 (250/bag)


Item Number: 12214500
  Be the first to review this item
$11.99
In Stock
Quantity 



Detailed Description

Felt Cushion Wad .500" (28ga diam) x 1/4" (250/bag)

*fits inside 20 gauge wads

The .500" (1/2") diameter Felt Wad is designed specifically for our line of 20-gauge wads. Tungsten loads and other reduced-volume loads demand an ideal filler/cushion wad. Our Felt Wads fit the bill. This Felt Wad fits perfectly in these and other 20-gauge wads:

 

-BP2090

-BP2092

-BP2093

-BP2094

-TPS 20 2-3/4"

-TPS 20 3"

-CSD 20

-CSD 20 3"

 

Unsurpassed energy absorption and cushioning qualities make our Felt material ideally suited as a cushion and filler wad. Our Felt wads have been the first choice for shotshell loaders for several generations. Our commitment to quality has never changed. We have used and recommended Felt wads for adjusting column heights of shotshell loads because they can accommodate many different loads and varied shot sizes. A well-stocked loading bench must always include a wide variety of cushion wads.

Adjusting Shot Columns: Different shot sizes will vary the shot column height of any given load.  For example, #9 shot will occupy less volume than #1 shot due to the space between the pellets. To remedy these height adjustments, use Cork or Felt wads underneath the shot to bring the shot column up to the ideal crimping height. Cork and Felt wads are light, dense, very flexible, and very easy to work with.

 

Mix & Match: Felt wad sizes can be mixed and stacked to accommodate any shot column height requirements. When used as fillers inside shotcups, use .422” diameter felt wads inside 28 gauge shotcups and .281” diameter felt wads inside .410 bore shotcups. Felt wads can be used in place of other filller wads, or on top of gas seals, but are not to be used directly on the powder.

Materials and Quality Assured: We use a special high-density synthetic felt to produce our felt wads. Our material is tough and dense, so it won't smash down into a pulp when you crimp down. Our high-density material assures that pellets won't embed in either the felt wad or your shotcup base. Die cut from the highest quality virgin materials right here in Minnesota.

 

Product Type: Filler and Cushion wad.
Material: Due cut from high-density synthetic felt
Made in U.S.A.



You May Also Like