MEC Collet HB #8080

MEC Collet HB #8080
Item Number: 1308080
  Be the first to review this item

Detailed Description

MEC Collet HB #8080

Resizing collet for many MEC reloaders and Super Sizer tool for 10, 12, 16, 20, 28, or .410 gauge. Replacement takes about five minutes. Not for use with the MEC 76 series, 12 gauge reloaders.


  1. Loosen locking nut under base.
  2. Unthread collet & pad assembly from base.
  3. Replace with new assembly.
  4. Adjust depth according to resizing requirement.
  5. Replace locking nut.

Tools required: Crescent wrench & screwdriver.

Curmudgeon's Loading Tips:

Resizing high-brass hulls: If you are experience resistence when resizing high-brass hulls, try just a little bit of Mica Wad Slick on the brass, die, or resizing area of your reloader. A little dry lube goes a long way toward saving reloading sanity. Also, the MEC Super Sizer works very for all high brass hulls.

For more great load data and loading hints, click on the Curmudgeon and sign up for our weekly email updates and product specials.

  • MEC part/accessory
  • MEC #: 8080
  • Made in USA