PT1260 (formerly VP) Multi-Metal wad for 12ga
Propulsion Technologies by Schoeller Plast have improved these wads; better quality, same great prices. Use the chart below to determine the appropriate load data for each wad. You'll find great data for all these wads in our Advantages manual.
DATA NOTICE: Do not use VP60 load data with the newly redesigned PT1260 wad. New data has been generated for this wad and will be supplied upon request with any purchase of PT1260 wads.
||12ga Wads for non-toxic shot
||PT1251 12ga 250/bag
||3/4 oz. steel
||PT1253 12ga 250/bag
||7/8 oz. steel
||PT1260 12ga 250/bag
||1 oz. steel
||PT1265 12ga 250/bag
||1 oz. steel
||PT1270 12ga 250/bag
||1-1/4 oz. steel
Curmudgeon's Loading Tips:
TYPE: 1-3/8 (lead), 1 (steel) The PT1260 12ga possesses Multi-Metal™: characteristics. Lead, steel, and ITX™: shot can all be loaded in this wad. Designed mainly for field loads, its best use is in 3" 12ga configurations. Some loads for the PT1260 will fit into 2.75" hulls. Best loads are 1-3/8 lead, 1-1/8 & 1-1/4 ITX™: shot game loads, and 1-ounce (#3) steel shot loads.
PT1260 overall length is 1.730" with a shotcup depth of 1.280" and four 45-degree angled slits (1.20"). The PT1260 has a tapered interior with wall thickness running near the mouth at .035" to a base side thickness of .060". The gas seal is .730" in diameter and .023" deep. The PT1260 wad will load in the 2.75" hulls of all types. When utilized in 3" 12ga hulls a gas seal or nitro card may be utilized. Slower burn rate propellants are the norm for this wad.
Made in Denmark
|Product Type: Wad, Multi-Metal capable for field use.|
Load data: See Advantages, ITX manuals.
Typical Loads: Non-toxic and high-capacity field loads.