Home  /   Shotshell Reloading  /  Hulls  /  New Hulls By Gauge  /  .410 Bore Hulls

Remington 410 3" 14mm Primed Hull (100/bag)


Remington 410 3
Item Number: REM4130
 Review Average:  
 Number of Reviews: 2
 View Reviews | Review this item
$26.99
In Stock

Will be shipped via: STANDARD GROUND
Quantity 


 WARNING: This product can expose you to chemicals including lead, which are known to State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov

Detailed Description

Remington 410 3" 14mm Primed Hull (100/bag)

These are premium, primed .410 Bore shotgun hulls designed for .410 loaders. They are primed with Remington's .410 primer. Made in the USA, these Remington hulls are perfect for your finest .410 field loads.

Specifications:

     + Gauge: .410 Bore 
     + Material: Plastic - Ribbed Tube
     + Primer: Rem 410 Primer 
     + Color: Green 
     + Length: 3.06 inches / 77.7 millimeters 
     + Brass Height: 0.570 inches / 14 millimeters 
     + Depth: 2.790 inches 
     + Wall Thickness: .030 inches 
     + Top Edge: Unskived 
     + Head Stamp: '410' / Brass 
     + Base Wad: Plastic Base Wad


Looking for Load Data? Check out the Lyman Shotshell Handbook, 6th Edition. More to come soon on LOTW and other BPI publications. 

Made in USA



 Product ReviewsClick here to review this item
410 max update 12/30/2025
MEC Reloaders.if you are set up to load 3 inch 11/16 and you use once fired Remington hulls.not the ones in the review.they are longer than once fired factoryWinchester,federal and fiocchi hulls.you will need to turn your final crimp up about a 3/4to a full turn UP! With the longer hull and 3/4 ounce load it will crush your hull right above the brass head.also when loading #8 or 9 shot 3/4 of a ounce works great.when you go bigger starting with 7 1/2.the bigger shot size starts taking up space and your weight will drop below 3/4 ounce.328 grains.use a scale and weigh your shot charges.try adding a few pellets of shot and get it closer to 328.about 322-325 is about all that will work for me on 7 1/2 shot without damaging the hull and still have a good crimp.hope this helps
 
MAX 410 LOADS 12/4/2025
These hulls are the longest 410 hull that I’ve had seen. they easily can take 3/4 ounce loads.one step up from 11/16.up until now.cheddite hulls had the longest and deepest hull capacity of any 410 hull that I’ve miked.not anymore!
 

You May Also Like