
Cheddite .410 2-1/2" new primed hull (bag/100)
These are true .410 hulls according to SAAMI specifications. The maximum body diameter, which is slightly wider than CIP European standards, They are stamped .410 on the head.
- 8mm brass
- Skived tube (taped material at the top of the hull)
- Cheddite 209 Primer
- Headstamp: "Cal. 36"
- Mfg by Cheddite
If cartridge manufacturers do not produce their own hulls, it is highly likely that they are using Cheddite hulls. These are reliable straight-wall hulls; extremely versatile for almost all load types. They crimp easily, either with a fold or roll. Primed with the reliable CX2000 (known as the Cheddite-209 in the USA).
A Super Crown Crimp Starter will make your crimping easier with much more satisfying results. Improved crimps and more complete powder ignition will result.
Remember, new/primed hulls are your best value and there's never a Hazmat charge when you ship them via ground service in the contiguous U.S.
Load data: See our Small Bore Manual both for lead & nontoxic loads, including buckshot loads for some .410 handguns.
Save even more....
Click here to buy in case quantity
Comparison Chart: .410 2-1/2" and 3" hulls |
Part # |
Mfg. |
Gauge |
Length |
Specs |
Primer |
Depth |
#1394165 |
Cheddite |
.410 |
2.500 |
red/skived 8mm |
Ched-209 |
2.219 |
#1394176 |
Cheddite |
.410 |
2.970 |
red/skived 16mm |
Ched-209 |
2.680 |
#0644100 |
Fiocchi |
.410 |
2.500 |
red/skived 8mm |
Fiocchi 616 |
2.229 |
#0644130 |
Fiocchi |
.410 |
2.997 |
red/skived 16mm |
Fiocchi 616 |
2.727 |
*Select an alternative if your first choice is out of stock. |
 Made in France |
|