Lee 28ga Load-All II

LEE 28ga Load-All II - New!

The Lee Load-All is an entry-level loading tool without a big investment. This is a good low-cost way to become familiar with the rudiments of shotshell handloading. This is a great starter reloader to load simplistic shotshell loads. If you are loading new hulls, then you may want to use a Roll Crimper and an Overshot Card to complete your crimp.  No single tool can do everything. If you have questions, please call us before you buy. This great little reloader can load over 200 shells an hour and get you started on your reloading journey. This reloader also includes a sheet of 28ga 2-3/4" load data.

• Press Type: Single-Stage handloading tool  
• Available gauges: 12ga, 16ga, 20ga, 28ga, .410 (sold separately)
• Shell Length: 2-3/4" or 3" only for 28ga version
• Frame Material: Steel frame, plastic base
• Priming Feature: Single primer loading. The operator must place the primer in the press. New spent primer drawer for easy emptying.
• Hopper holds over 5 lbs. of shot, enough to load over 125 rounds
Lee Load-All reloading tool  
Lee #92473
Made in USA

Accessories:

• Charge Bar Shot Weight: Comes with 14 shot bushings
• Powder Bushings Included: Comes with 33 powder bushings
• Comes with 6 and 8 point crimp starters
• Safety charge bar
• Steel sizing ring 
• Primer catcher with easy-to-empty drawer
• Primer guide 
• Spring and pin 
• One screw and two bolts with locking nuts
• Load Data Sheet for 28ga 2-3/4"

• Note: this press can NOT load 2-1/2" shotshells

Includes shot bushings: Black: 1/2 oz. 5/8 oz, 11/16 oz, 3/4 oz, 13/16 oz, 1-3/8 oz. Red: 7/8 oz, 1 oz, 1-1/8 oz, 1-1/4 oz, 1-1/2 oz, 1-5/8 oz, 1-3/4 oz, and 1-7/8 oz.

• Includes powder bushings: 052, 053, 054, 056, 058, 060, 062, 065, 067, 070, 073, 076, 079, 082, 086, 090, 095, 100, 105, 110, 116 122, 128, 134, 141, 148, 155, 163, 171 ,180, 189, 198 and 224.

Curmudgeon's Loading Tips:

Resizing high-brass hulls: If you are experience resistence when resizing high-brass hulls, try just a little bit of Mica Wad Slick on the brass, die, or resizing area of your reloader. A little dry lube goes a long way toward saving reloading sanity. Also, the MEC Super Sizer works very well for all high brass hulls.

For more great load data and loading hints, click on the Curmudgeon and sign up for our weekly email updates and product specials.

Made in USA