Lee 12ga Load-All II modified for 67.5mm Hulls


Lee 12ga Load-All II modified for 67.5mm Hulls
Item Number: LEE90014
  Be the first to review this item
$72.79
In Stock
Quantity 



Detailed Description

LEE 12ga Load-All II for 67.5mm Hulls

The Lee Load-All is an entry-level loading tool without a big investment. This is a good low-cost way to become familiar with the rudiments of shotshell handloading.

This is a great starter reloader to load simplistic shotshell loads. If you are loading new hulls, then you may want to use a Roll Crimper and an Overshot Card to complete your crimp.  No single tool can do everything.

Includes an extra white bushing** in .224 for Nobel powders, along with special notes and charge table for the Nobel bushing.

**Bushing not shown in photo

Warning: If press is converted over to 16 or 20 Ga, it will no longer be compatible with 67.5mm shells.

Specifications:

  • Press Type: Single-Stage handloading tool  
  • Available gauges: 12ga, 16ga or 20ga (sold separately) 
  • Shell Length: 2-3/4" or 3" or 67.5mm only
  • Frame Material: Steel frame, plastic base
  • Priming Feature: Single primer loading. The operator must place the primer in the press.
  • Made in USA

Accessories:

  • Comes with 6 and 8 point crimp starters
  • Safety charge bar
  • Steel sizing ring 
  • Aluminum plate for primer catcher 
  • Spare wad guide 
  • Primer guide 
  • Spring and pin 
  • One screw and two bolts with locking nuts
  • Note: this press can NOT load 3-1/2" shotshells

Charge Bar Shot Weight: Comes with 8 shot bushings

  • Bushings included measure 7/8, 1, 1-1/8, 1-1/4, 1-1/2, 1-3/4 and 1-7/8 ounces

Powder Bushings Included: 

  • Bushing measure 095, 100, 105, 110, 116, 122, 128, 134, 141, 148, 155, 163, 171, 180, 189 and 198 cubic inches

Curmudgeon's Loading Tips:

Resizing high-brass hulls: If you are experience resistence when resizing high-brass hulls, try just a little bit of Mica Wad Slick on the brass, die, or resizing area of your reloader. A little dry lube goes a long way toward saving reloading sanity. Also, the MEC Super Sizer works very well for all high brass hulls.

For more great load data and loading hints, click on the Curmudgeon and sign up for our weekly email updates and product specials.



You May Also Like