MEC E-Z Prime for Single Stage #285CA

MEC E-Z Prime for Single Stage #285CA
Item Number: 130285CA
 Review Average:  
 Number of Reviews: 2
 View ReviewsReview this item

Detailed Description

MEC E-Z Prime for Single Stage #285CA
(*select gauge: 10ga, 12ga, 16ga, 20ga, or 28ga)

Forget fumbling with primers, this is an easy way to "hot rod" your MEC single-stage reloader. This accessory speeds up handloading and allows you to pay attention to other, more critical loading steps.

The E-Z Prime Automatic Primer Feed eliminates handling individual primers and automatically feeds them for use.

Technical Information:

Fits: MEC Single Stage any 600JR, 600JR Mark 5, Sizemaster, or Steelmaster loader.
Application: Converts presses to automatic priming.

On earlier models of the 600 Jr. and 700 VersaMEC (Mid-70s and before) the hole in the turret for the reprime punch bolt was 1/4" diameter. After this the hole was enlarged to 1/2" diameter and a bushing was added to accommodate the addition of a primer feed later. If you have one of the older models, you will have to drill out the existing 1/4" hole to 1/2".

Kit Includes:

  • Tray Assembly
  • Bracket Assembly
  • Actuator Chain
  • Complete installation instructions included.

MEC EZ-Fill Funnel (#1308994) is another gizmo from MEC that works well as a partner product to the MEC shot/powder bottles. Together, these tools make loading so much easier and less frustrating. If you've ever poured shot or powder, then you have spilled costly shot or powder. This is just inevitable. Limit your costly spills and the expletives that emanate from your reloading bench with this simple funnel.

The EZ-Fill Funnel fits directly over all MEC (large or small) shot and powder bottles for easy non-spill fills. It couldn't be any easier and it will pay for itself in no time.

Click here to view MEC Bushing Chart

Curmudgeon's Loading Tips:

The Universal Charge Bar is an alternative product that may save you money and storage space. Some people prefer using their bushings with original MEC Charge Bars, while others like the universal adjustability of the Universal Charge Bar

You can improve MEC performance with just a couple convenient accessories:

Better Crimps: When loading new/primed hulls, your crimps may not stay closed if you are using a standard plastic crimp starter. The Super Crown Crimp Starter is designed to put a lasting crimp memory into new plastic, essential for tight and functional crimps on new hulls. The Super Crown also provides better crimps on once-fired hulls too.

For more great load data and loading hints, click on the Curmudgeon and sign up for our weekly email updates and product specials.

  • MEC Replacement Part/Accessory
  • #130285CA
  • Made in USA

 Product ReviewsClick here to review this item
EXCELLENT 1/18/2018
A very good add on! 5/12/2016
easy to set up. Have it on 12ga.& 20ga.
- Jerry Wolf, IA

You May Also Like