LEE 12ga Load-All II
The Lee Load-All is an entry-level loading tool without a big investment. This is a good low-cost way to become familiar with the rudiments of shotshell handloading.
This is a great starter reloader to load simplistic shotshell loads. If you are loading new hulls, then you may want to use a Roll Crimper and an Overshot Card to complete your crimp. No single tool can do everything.
Note: this press can NOT load 2-1/2" or 3-1/2" shotshells
Charge Bar Shot Weight: Comes with 8 shot bushings
Powder Bushings Included:
Resizing high-brass hulls: If you are experience resistence when resizing high-brass hulls, try just a little bit of Mica Wad Slick on the brass, die, or resizing area of your reloader. A little dry lube goes a long way toward saving reloading sanity. Also, the MEC Super Sizer works very for all high brass hulls.
For more great load data and loading hints, click on the Curmudgeon and sign up for our weekly email updates and product specials.
|Product ReviewsClick here to review this item|
|Great little unit||1/29/2021|
|I bought one of these a little while back, and I gotta say “this is a great little unit”. It does pretty much everything you need to load a shotshell. It decaps, sizes brass to work in any shotgun, has multiple powder bushings and shot bushingseven though I haven’t loaded any shot on it, load slugs and buckshot mainly, it primes shells perfectly, the wad guide and ram do what they’re supposed to do, and it crimps both 6 and 8 star shells. It does leak a tiny bit of powder on the really fine powder, but it’s not bad really. I got no complaints. Time will tell how long it’ll hold up, but so far so good. I recommend this little unit to anyone thinking about getting into shotshell loadingonce we can find primers and powder again. But I really have no complaints at all about the Lee load all 2, it does 3” shells too! Does what I need it to do.|